So I've seen all of these stones in person and narrowed it down to this list after confirming they were eye clean. Given my limited experience, it was pretty hard for me to tell much difference when looking at optical performance.
What I was hoping to do is try to whittle this list down to about 3, and then go back in and make a final decision using an aset / ideal scope.
I expect without images it's tough for even the experienced to narrow it down, but if I don't ask then I won't know. In evaluating the information I do have below, does anyone have any opinions (e.g. would you rule out any stones based on proportions, girdle, etc)? Would you expect certain stones to do better than others?
Certainly appreciate any feedback.
#1, Princess, 1.04 ct, E – SI2
Polish: EX
Symmetry: VG
Measurement: 5.61mm x 5.57mm x 3.83mm
Girdle: thin, 2.0% polished
Cutlet: pointed
Depth %: 68.8%
Table %: 73%
Crown Height: 14.0%
Pavilion Depth: 53.0%
#2, Princess, 1.00 ct, E – VS2
Polish: EX
Symmetry: VG
Measurement: 5.62mm x 5.58mm x 3.96mm
Girdle: medium – thick
Cutlet: none
Depth%: 71.0%
Table%: 68%
#3, Princess, 1.00 ct, F – SI1
Polish: EX
Symmetry: EX
Measurement: 5.56mm x 5.51mm x 3.99mm
Girdle: slightly thick
Cutlet: none
Depth%: 72.5%
Table%: 72%
#4, Princess, 1.03 ct, E – VS2
Polish: VG
Symmetry: EX
Measurement: 5.54mm x 5.54mm x 4.02mm
Girdle: slightly thick
Cutlet: none
Depth%: 72.6%
Table%: 72%
#5, Princess, 1.04 ct, E – SI2
Polish: EX
Symmetry: VG
Measurement: 5.69mm x 5.53mm x 3.72mm
Girdle: thin - thick
Cutlet: none
Depth%: 67.2%
Table%: 72%
#6, Princess, 1.01, E – SI1
Polish: EX
Symmetry: VG
Measurement: 5.51mm x 5.51mm x 3.91mm
Girdle: medium - slightly thick
Cutlet: none
Depth%: 71%
Table%: 73%
What I was hoping to do is try to whittle this list down to about 3, and then go back in and make a final decision using an aset / ideal scope.
I expect without images it's tough for even the experienced to narrow it down, but if I don't ask then I won't know. In evaluating the information I do have below, does anyone have any opinions (e.g. would you rule out any stones based on proportions, girdle, etc)? Would you expect certain stones to do better than others?
Certainly appreciate any feedback.
#1, Princess, 1.04 ct, E – SI2
Polish: EX
Symmetry: VG
Measurement: 5.61mm x 5.57mm x 3.83mm
Girdle: thin, 2.0% polished
Cutlet: pointed
Depth %: 68.8%
Table %: 73%
Crown Height: 14.0%
Pavilion Depth: 53.0%
#2, Princess, 1.00 ct, E – VS2
Polish: EX
Symmetry: VG
Measurement: 5.62mm x 5.58mm x 3.96mm
Girdle: medium – thick
Cutlet: none
Depth%: 71.0%
Table%: 68%
#3, Princess, 1.00 ct, F – SI1
Polish: EX
Symmetry: EX
Measurement: 5.56mm x 5.51mm x 3.99mm
Girdle: slightly thick
Cutlet: none
Depth%: 72.5%
Table%: 72%
#4, Princess, 1.03 ct, E – VS2
Polish: VG
Symmetry: EX
Measurement: 5.54mm x 5.54mm x 4.02mm
Girdle: slightly thick
Cutlet: none
Depth%: 72.6%
Table%: 72%
#5, Princess, 1.04 ct, E – SI2
Polish: EX
Symmetry: VG
Measurement: 5.69mm x 5.53mm x 3.72mm
Girdle: thin - thick
Cutlet: none
Depth%: 67.2%
Table%: 72%
#6, Princess, 1.01, E – SI1
Polish: EX
Symmetry: VG
Measurement: 5.51mm x 5.51mm x 3.91mm
Girdle: medium - slightly thick
Cutlet: none
Depth%: 71%
Table%: 73%