shape
carat
color
clarity

virtual inventory vs. super ideal diamond questions

I know :( I was hoping that a cbi in my size with a lower color (LMN) would be in my price range. I'm not sure about a special order, but I can ask! I always assume that any specific/special order will cost more, and the idea was to save $ haha. But good thinking, might as well ask!
Let us know what you find out.
 
Yes! I’m also curious, as one of my schemes to save money overall with this upgrade process is to start with a low color and trade up for a high color (same carat weight). In this way, I can use the same setting for two stones...
 
Yes! I’m also curious, as one of my schemes to save money overall with this upgrade process is to start with a low color and trade up for a high color (same carat weight). In this way, I can use the same setting for two stones...

Speaking of which, I want to see if my plat shank can be used when I set my aqua. I’ll have to email and ask DK.
 
r7075-finger-shot.JPG r7075-c.jpg


I know that "crying over spilt milk" is pointless, but hopefully others can commiserate with me a little on missing out. I emailed David from DBL almost exactly 2 years ago about this diamond (obviously I've been considering going this route for a while). This is the EXACT color I want, and it would have been a great size at an (almost comically) low price. I know it isn't a PS-preferred cut, but the color just gets me every time. Of course now it's long sold.

http://www.diamondsbylauren.com/index.php?search[terms]=R7075&search[mode]=any
 
nod.gif

So is it the ring or a ring???

If it's the former, he must have got himself in his future FIL's good books just by asking for help and buying well ;) :D
 
So is it the ring or a ring???

If it's the former, he must have got himself in his future FIL's good books just by asking for help and buying well ;-) :D
My daughter's Ering. He knows I like diamonds. ;))
 
Speaking of which, I want to see if my plat shank can be used when I set my aqua. I’ll have to email and ask DK.

Sounds good! I’m also considering a new head on my old ering setting that is languishing in the jewelry box. Do you remember how much it cost to put that head on your shank? I think I may choose platinum if I use it, not sure yet what my plan would be!
 
r7075-finger-shot.JPG r7075-c.jpg


I know that "crying over spilt milk" is pointless, but hopefully others can commiserate with me a little on missing out. I emailed David from DBL almost exactly 2 years ago about this diamond (obviously I've been considering going this route for a while). This is the EXACT color I want, and it would have been a great size at an (almost comically) low price. I know it isn't a PS-preferred cut, but the color just gets me every time. Of course now it's long sold.

http://www.diamondsbylauren.com/index.php?search[terms]=R7075&search[mode]=any

Start a new thread with this link as inspiration—I bet these fine folks here could find you something similar! Everyone loves the thrill of the hunt. ;)2
 
Heard back from IDJ, and they offered this stone:

https://v360.in/movie/59_2172

Scores under 2 on the HCA, but don't love that "polish" isn't X. It's under my 3K preferred budget, which is wonderful.

Also, this stone: https://www.b2cjewels.com/dd/11771925/Round-diamond-K-color-VS1-clarity got back with ASET image. What do you think?
This one is 3200 ish--so more expensive than the one posted above.
11771925 - Aset.jpg

Finally, the JA one from before with this IS image (below). This one is also a bit over 3K.


4995627.jpg

Anyone have thoughts on these 3? @sledge @ILikeShiny @TreeScientist


Also talking to David from DBL tomorrow, since he had the "stone who got away" from before.
 
Thanks @SimoneDi ! I looked at Leibish earlier today, but unfortunately they didn't have anything at the color/price I'm hoping for. I like the slight brown/champagne tones, but that one looks much darker than I like. Thanks for the suggestion though!
 
I like both the B2C stone and the JA stone. Both are superbly cut and will likely be great performers IRL. The IDJ stone does not appear to be as well cut form the video alone. The arrows are not as "sharp" which may result in reduced scintillation.

For the choice between the B2C and JA stones, I guess it comes down to the color and clarity. If you like brown undertones, I would say go for the B2C stone. Higher clarity and beautiful light brown/champagne color. The JA stone is nice too, and I know that many prefer the yellow undertones, but I would honestly be worried about durability with that giant feather sitting right on the edge of the table. Since that's the position that usually sustains the most impact while wearing a ring, I would be worried about the feather growing larger over time with repeated knocks.
 
Heard back from IDJ, and they offered this stone:

https://v360.in/movie/59_2172

Scores under 2 on the HCA, but don't love that "polish" isn't X. It's under my 3K preferred budget, which is wonderful.

Also, this stone: https://www.b2cjewels.com/dd/11771925/Round-diamond-K-color-VS1-clarity got back with ASET image. What do you think?
This one is 3200 ish--so more expensive than the one posted above.
11771925 - Aset.jpg

Finally, the JA one from before with this IS image (below). This one is also a bit over 3K.


4995627.jpg

Anyone have thoughts on these 3? @sledge @ILikeShiny @TreeScientist


Also talking to David from DBL tomorrow, since he had the "stone who got away" from before.
I can’t keep track anymore... remind me of the sizes as well as color/clarity of each choice? As well as where they score on HCA and the three GIA criteria (cut/polish/symmetry).
 
Sounds good! I’m also considering a new head on my old ering setting that is languishing in the jewelry box. Do you remember how much it cost to put that head on your shank? I think I may choose platinum if I use it, not sure yet what my plan would be!

I can’t remember lol. I want to say in the 200s but I’m really not sure. My memory is shot these days.
 
Heard back from IDJ, and they offered this stone:

https://v360.in/movie/59_2172

Scores under 2 on the HCA, but don't love that "polish" isn't X. It's under my 3K preferred budget, which is wonderful.

Also, this stone: https://www.b2cjewels.com/dd/11771925/Round-diamond-K-color-VS1-clarity got back with ASET image. What do you think?
This one is 3200 ish--so more expensive than the one posted above.
11771925 - Aset.jpg

Finally, the JA one from before with this IS image (below). This one is also a bit over 3K.


4995627.jpg

Anyone have thoughts on these 3? @sledge @ILikeShiny @TreeScientist


Also talking to David from DBL tomorrow, since he had the "stone who got away" from before.


@lovedogs OMG, I just put that 1.01k on my favorites list last night!!! I also did a search on it and B2C is the least expensive. I don’t want it... I happened to see it is a beautiful stone, so I saved it. It came across my FB feed in an ad.
 
One more vote for the K VS1! I was able to open the link this am. It’s a beautiful diamond and the color seems much closer to what you like!
 
If IDJ can get the b2c virtual stone, I'd say have them set it and get the stone in a one stop shop so you dont need to insure for someone else to set.
 
Hi sledge,

The small dark triangles on this image aren't a bad thing. Yes it is a result of hte longer lgf's but those tiny dark spots can be indicative of light entering from the 75-90 degree angle to the viewer which in diffuse lighting will not impact the brightness/contrast but in spot lighting can very well add to the sparkle scintillation.

Sorry for delay. Had to spend some time with the honey. Comments below on each stone.


Angles aren't the most complimentary, and 80 LGF's. On still picture you can see where the angles is beginning to rear it's ugly head (see red marks).

Capture3.PNG
 
If IDJ can get the b2c virtual stone, I'd say have them set it and get the stone in a one stop shop so you dont need to insure for someone else to set.

That's a good idea. I'll ask about that option since I'd rather have the stone buying and setting done at one place
 
Hi sledge,

The small dark triangles on this image aren't a bad thing. Yes it is a result of hte longer lgf's but those tiny dark spots can be indicative of light entering from the 75-90 degree angle to the viewer which in diffuse lighting will not impact the brightness/contrast but in spot lighting can very well add to the sparkle scintillation.

Thank you for the clarification @Rhino, much appreciated.

I'm only a few months into diamonds, so while I've learned quite a bit I am still learning some of the finer points. To say I'm intrigued with the technical details would be an understatement.

Not that you need to know my life story, but was being very sincere in my thank you for feeding me some more knowledge. :cool2:
 
The JA stone looks like it has a large feather (crack) from the IS image. I'd be very wary of that one.

The K VS1 at B2C looks great. I think it would look vastly better in a solitaire than the IDJ O-P. I have an O color stone that I love now that it is set in a halo, but I would not have liked it in a solitaire.
 
The JA stone looks like it has a large feather (crack) from the IS image. I'd be very wary of that one.

The K VS1 at B2C looks great. I think it would look vastly better in a solitaire than the IDJ O-P. I have an O color stone that I love now that it is set in a halo, but I would not have liked it in a solitaire.

Whichever one I choose will be set in my current e-ring setting (which is a halo), so that should be fine. Why do you think that the O/P would look better in a halo vs. soli? Just curious about your experience with it!
 
Oh, for some reason I thought you were putting it in a solitaire! A halo makes the color of the center stone more defined. I wasn't in love with the color of my O color stone unset. I knew I needed to make the color an asset rather than a negative. Caysie said the yellow bezel would bring out the yellow in the stone, and she was very right! I wouldn't recommend O-P without some yg around it to bring out the color. Here's my ring with the O color stone on the top:
2.1ctOcolorAVR (5).jpg
As far as K color goes, it will appear the slightest champagne in a white halo. I kind of wanted to set my K antique asscher in a halo because I do like that color contrast, too. But I thought the size of it was better for me without a halo. It looks mostly white as it is set in prongs.
 
@diamondseeker2006 thanks for the pics, helpful! It's great to see the colors set. I LOVE your cvb ring, it's wonderful.
 
Hi, I don’t see too much yellow in the o-p as a solitaire. What color was the band? It looked white, at least in pictures...

Oh, for some reason I thought you were putting it in a solitaire! A halo makes the color of the center stone more defined. I wasn't in love with the color of my O color stone unset. I knew I needed to make the color an asset rather than a negative. Caysie said the yellow bezel would bring out the yellow in the stone, and she was very right! I wouldn't recommend O-P without some yg around it to bring out the color. Here's my ring with the O color stone on the top:
2.1ctOcolorAVR (5).jpg
As far as K color goes, it will appear the slightest champagne in a white halo. I kind of wanted to set my K antique asscher in a halo because I do like that color contrast, too. But I thought the size of it was better for me without a halo. It looks mostly white as it is set in prongs.
 
Hi, I don’t see too much yellow in the o-p as a solitaire. What color was the band? It looked white, at least in pictures...
Those are two separate rings she is wearing. The O-P is on the top.
 
@Wewechew and @KristinTech I wanted to update this thread to tell you what I found out about CBI.

In terms of CBI, Melissa was incredibly helpful and nice. She explained that cutting to order is very difficult in lower colors (lower than K), because the grades are much "wider" than the higher colors, and because the rough is less predictable in terms of how it will come out. Also, they hardly ever get requests for anything lower than K, since the "norm" is colorless or near-colorless stones. therefore, it wouldn't really be worth it to cut a .9 or a 1ct warmer stone. Obviously this might be different if I was looking for something huge, in which case the $ might mitigate some of this. I think they also stopped stocking the lower colors for a similar reason--less demand and harder to predict/grade since the continuum is bigger.


I hope that helps!
 
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Top