3-stone ring Girls - are you out there?

[LLJsmom]

Beautiful profile... love the petals.

Exactly!!

 

[Honeybasil]

My variation of a three stone and while I’ve never really fancied the look of them before, I absolutely love the way it turned out! Very dainty which is exactly what I was going for.

1.84ct OMC x 2.5mm OMC’s from my grandmother.

Such a beautiful setting!

 

[Wintersun51]

Thank you for the kind comments - managed to get a slightly better photo outside.

 

[silkandsapphires]

My new three stone. New to this forum but I have stalked this thread for forever!

 

[Honeybasil]

My new three stone. New to this forum but I have stalked this thread for forever!

Loooooovvve this!

 

[maita13]

My new three stone. New to this forum but I have stalked this thread for forever!

You must start an SMTB thread on this stunner- PLEASE!!

 

[silkandsapphires]

You must start an SMTB thread on this stunner- PLEASE!!

Just shared one! I'm new here so I was scared haha so thank you for prompting me to!

 

[nala]

So here is my GIA 2.9 E si 1 with .31 on each side on side 4.75 finger.

 

[Sparkles88]

So here is my GIA 2.9 E si 1 with .31 on each side on side 4.75 finger.

Wow! Stunning @nala

 

[Cerulean]

So here is my GIA 2.9 E si 1 with .31 on each side on side 4.75 finger.

Wowza. I loooove the proportions - the glorious center is still queen of the ball!

 

[AnastasiaBeaverhausen]

Forgot to post this baby here:



It's a 6mm sapphire center with 4mm(ish) diamond sides on a size 6.5 ring.

 

[nala]

My new to me 3 stone—omc totaling 1.20 tcw

 

[suredoshine]

Tiffany 3-stone Diamond Ring

Is there a photo of your ring somewhere? I don't see it here. Would love to see from top and side!

 

[Rfisher]

Rfisher, I'm getting ready to reset my diamond in a three stone, and I see you have 8 prongs. Can you show me a photo of that ring from the side (front?) so I can see the way it is set? Thank you!

I’d love to hear/see what you currently have, and what’s your plans? Exciting!

Here’s plenty of photos - hope it helps

Three stone OEC ring, victorian replica OWD/DK

I got a box today! Yay!

www.pricescope.com

And here’s another show me your 3-stone thread, if you haven’t seen it already

Show me your 3-stone rings.

I have searched this forum for days with every combination of words for three stones and I know I still haven''t found them all. On top of that there is no thread for just three stones! So...show me your three stone rings! All sizes, shapes and colors including colored stones are welcome!

www.pricescope.com

 

[suredoshine]

I thought I added mine here but I guess I never did.

1.92 L VS2 OEC/transitional with .62ctw side OECs

8.07-8.17mm center with 4.3mm sides in case anyone is trying to figure out 3-stone ratios.

That's beautiful! May I see the 8 prong setting from the side? I'm getting ready to order a 3 stone and am nervous to have the center stone just in 4 prongs, because of hitting the girdle of my diamond from the front or back. My center stone is 2.16 round, doing 1 carat on each side.

 

[suredoshine]

Here is mine. I absolutely love it. I have generally leaned towards halos and airline bezels. This is surprisingly pleasing to my eye. I always admired 3 stones but ended up on different paths. I absolutely love the old cuts.

2.16 N OEC
8.02mm X 8.14mm X 5.24mm

Side Stones:

2 1.13 ST VS OECs

Total finger coverage is around 22mm. Each stones is held by 8 prongs in a crown setting.

This is very similar to what I'm looking to do! My center is also 2.16, 8.31-8.37mm, and I'm looking at putting 1.01's on each side that are 6.5mm. I love this 8 prong setting! It really protects the girdle of the stones. I'd be fine with 6 prong too, I'm glad you showed this from the side, it's great inspiration!

 

[suredoshine]

I’d love to hear/see what you currently have, and what’s your plans? Exciting!

Here’s plenty of photos - hope it helps

Three stone OEC ring, victorian replica OWD/DK

I got a box today! Yay!

www.pricescope.com

And here’s another show me your 3-stone thread, if you haven’t seen it already

Show me your 3-stone rings.

I have searched this forum for days with every combination of words for three stones and I know I still haven''t found them all. On top of that there is no thread for just three stones! So...show me your three stone rings! All sizes, shapes and colors including colored stones are welcome!

www.pricescope.com

Thank you so much! I love your setting! And I'm just headed to that other 3-stone thread, this is all so inspiring!

 

[Spring Day]

That's beautiful! May I see the 8 prong setting from the side? I'm getting ready to order a 3 stone and am nervous to have the center stone just in 4 prongs, because of hitting the girdle of my diamond from the front or back. My center stone is 2.16 round, doing 1 carat on each side.

Hi! Sure here are some pics. I’m actually currently getting my 3 stone redone with bigger side stones in the 6.6-6.7mm range so our rings might be similar proportion wise. I’m also trying to go with 4 double claw prongs this time around. Your jeweler will know the best course of action for your particular diamond.

 

[jaysonsmom]

Finally adding my 3-stone that has been in the works for a couple months! 1.81ct H GIA XXX mined center with 0.5 ct each G color MMD! The diamonds match extremely well, and now I have 2 amazing wedding sets!

 

[LLJsmom]

Finally adding my 3-stone that has been in the works for a couple months! 1.81ct H GIA XXX mined center with 0.5 ct each G color MMD! The diamonds match extremely well, and now I have 2 amazing wedding sets!

Great way to get another gorgeous wedding set. Beautiful proportions. 3 stones are the best! Congratulations @jaysonsmom!!

 

[LLJsmom]

Can’t believe I get to contribute to this thread.
2.27 E ACA, 1.11 F, 1.207 G. Setting by Steven Kirsch

 

[AnastasiaBeaverhausen]

Finally adding my 3-stone that has been in the works for a couple months! 1.81ct H GIA XXX mined center with 0.5 ct each G color MMD! The diamonds match extremely well, and now I have 2 amazing wedding sets!

Woot woot! Check out that finger coverage!

 

[AnastasiaBeaverhausen]

Can’t believe I get to contribute to this thread.
2.27 E ACA, 1.11 F, 1.207 G. Setting by Steven Kirsch

Holy cow. Another gorgeous wall of bling. Y'all gotta give me a moment to catch my breath here!

 

[nala]

Finally adding my 3-stone that has been in the works for a couple months! 1.81ct H GIA XXX mined center with 0.5 ct each G color MMD! The diamonds match extremely well, and now I have 2 amazing wedding sets!

Ok. We’ve been waiting a while for this one! It deserves its own thread with like a gazillion pics!

 

[Spring Day]

Can’t believe I get to contribute to this thread.
2.27 E ACA, 1.11 F, 1.207 G. Setting by Steven Kirsch

I love it soooo much! Keep posting more pics!

 

[the_mother_thing]

I don’t get around here very often anymore with work, family & other goings-on, so I never created a SMTB thread when I received this back from Whiteflash in October — major fail on my part. But popping on for a little ‘bling-spiration’ for another project, and figured I’d at least get her added to this thread with so many beautiful 3-stone sparklers!

Last fall, I upgraded my 2.10 ct K-ACA (8.25mm) - the ring in my avatar - to a 2.57 ct K-ACA (8.85mm), added two .5ct J-GIA XXX (5mm) sides; and, modified the WF Butterflies gallery, added tab-ish/semi-bezel outer ‘prongs’ & a little WF ACA pave down the sides. Here she is ... in delicious 18K unplated WG splendor.

 

[Spring Day]

I don’t get around here very often anymore with work, family & other goings-on, so I never created a SMTB thread when I received this back from Whiteflash in October — major fail on my part. But popping on for a little ‘bling-spiration’ for another project, and figured I’d at least get her added to this thread with so many beautiful 3-stone sparklers!

Last fall, I upgraded my 2.10 ct K-ACA (8.25mm) - the ring in my avatar - to a 2.57 ct K-ACA (8.85mm), added two .5ct J-GIA XXX (5mm) sides; and, modified the WF Butterflies gallery, added tab-ish/semi-bezel outer ‘prongs’ & a little WF ACA pave down the sides. Here she is ... in delicious 18K unplated WG splendor.

Oh! My! This is absolutely beautiful! I love that you modified the butterfly to add to tab like prongs on the side stones.
But you do know that since you’re here... you gotta make an SMTB! Please! It’s too beautiful to be lost in the shuffle of the 3 stone thread! It needs its own!

 

[bling_dream19]

Oh! My! This is absolutely beautiful! I love that you modified the butterfly to add to tab like prongs on the side stones.
But you do know that since you’re here... you gotta make an SMTB! Please! It’s too beautiful to be lost in the shuffle of the 3 stone thread! It needs its own!

Yes please its beautiful!!

 

[Lovecarats]

I don’t get around here very often anymore with work, family & other goings-on, so I never created a SMTB thread when I received this back from Whiteflash in October — major fail on my part. But popping on for a little ‘bling-spiration’ for another project, and figured I’d at least get her added to this thread with so many beautiful 3-stone sparklers!

Last fall, I upgraded my 2.10 ct K-ACA (8.25mm) - the ring in my avatar - to a 2.57 ct K-ACA (8.85mm), added two .5ct J-GIA XXX (5mm) sides; and, modified the WF Butterflies gallery, added tab-ish/semi-bezel outer ‘prongs’ & a little WF ACA pave down the sides. Here she is ... in delicious 18K unplated WG splendor.

I can't stop staring at this ring. It's gorgeous!

 

[Diamond*Dana]