Show me the Bling - the Laboratory Grown version!

[Dhana]

Wow . Was this off the instagram or a custom? May I ask what are the specs.
Also is it a screwback?

 

[Niel]

Wow . Was this off the instagram or a custom? May I ask what are the specs.
Also is it a screwback?

I messaged him on Instagram to see if he had any 6mm lab stones. He didn’t and said he doesn’t usually get any less than 2ct. Then like the next day he’s like “well actually I got these in a batch” and I was all over it. I’m great full because had her listed them on Instagram I would have missed them. They’re colorless I think he said F? 6.45mm 2tcw- they are screw backs.

 

[Dhana]

Good to know ! Are you comfortable sharing the cost ? Stone and stone plus setting . I really want a 2CTW and am hoping still for lightbox , i am prepared to wait until dec, but if I have no luck I will need to look at others . ( I will have to change them to screw or guardian backs if I buy from lightbox)

 

[Niel]

Good to know ! Are you comfortable sharing the cost ? Stone and stone plus setting . I really want a 2CTW and am hoping still for lightbox , i am prepared to wait until dec, but if I have no luck I will need to look at others . ( I will have to change them to screw or guardian backs if I buy from lightbox)

i can tell you mine were under 1900 but I can’t guarantee he’d be able to do that price again. That’s stone and 14k screw backs included.
Do you need to change the backs becuase you’re worried they’ll pop off? I have found some stud backs on Amazon that solve that problem.

 

[123ducklings]

I got the 1 1/8 ctw princess cut necklace from lightbox. I thought there was a lightbox thread somewhere but can't find it. Anyway, it sparkles more than I thought. I thought it would look glassy and flat but it doesn't. It's really pretty and lively. Kinda wish I bought 2 to make earrings!





With my F, VS (something) Hearts on fire diamond, .70 ct. Sadly it's barely bigger than it.


In indirect sun


Hope this helps someone decide! Special thanks to @Buttercookies for the coupon

Thanks for the pics! Are you going to keep it as a necklace or reset? I think this is the thread you were looking for:

https://www.pricescope.com/community/threads/photos-of-lightbox-jewelry.243885/

 

[123ducklings]

i can tell you mine were under 1900 but I can’t guarantee he’d be able to do that price again. That’s stone and 14k screw backs included.
Do you need to change the backs becuase you’re worried they’ll pop off? I have found some stud backs on Amazon that solve that problem.

Beautiful earrings and great price! Thank you for sharing!

 

[Dhana]

Agreed thanks for sharing ! Yes just to have an idea . If lightbox fails atleast I will have an idea , thanks

I am buying it for my mom. all our earrings are screw backs _
More secure this way, but u check the screw once in a few days !
A guardian back maybe too hard for her I think from what I read

 

[Buttercookies]

I got the 1 1/8 ctw princess cut necklace from lightbox. I thought there was a lightbox thread somewhere but can't find it. Anyway, it sparkles more than I thought. I thought it would look glassy and flat but it doesn't. It's really pretty and lively. Kinda wish I bought 2 to make earrings!





With my F, VS (something) Hearts on fire diamond, .70 ct. Sadly it's barely bigger than it.


In indirect sun


Hope this helps someone decide! Special thanks to @Buttercookies for the coupon

It looks gorgeous. Once you have 4 corner prongs, it will look bigger than the 0.7 RB.

 

[GreenPapaya]

@123ducklings thank you! I'll wear it as a necklace for now. But it's pokes on the edges where there's no prongs. I think I'll want it in set in a ring eventually. I just have to go find a setting and someone in NYC that does this kind of thing.

@Niel you're gorgeous! I thought you're older from your posts. But nope, you look so young and fabulous Those earrings are beautiful too. Park Fine Group is in NYC? But he's probably in high demand and doesn't set stones that are not his.

@Buttercookies I hope it'll look bigger when it has four prongs and set a little higher in a ring. That's something to look forward to. I just have to find a jeweler.

 

[Niel]

@123ducklings thank you! I'll wear it as a necklace for now. But it's pokes on the edges where there's no prongs. I think I'll want it in set in a ring eventually. I just have to go find a setting and someone in NYC that does this kind of thing.

@Niel you're gorgeous! I thought you're older from your posts. But nope, you look so young and fabulous Those earrings are beautiful too. Park Fine Group is in NYC? But he's probably in high demand and doesn't set stones that are not his.

@Buttercookies I hope it'll look bigger when it has four prongs and set a little higher in a ring. That's something to look forward to. I just have to find a jeweler.

Thanks. You’re not the only person to think I am an old lady. I must give off that vibe

 

[FL_runner]

 

[m1918]

HOLY MOLY

 

[FL_runner]

HOLY MOLY

I know I almost passed out when I opened the box

 

[m1918]

I know I almost passed out when I opened the box

Halos are not really my style because I think they’re too fancy for me but yours makes me feel like I NEED one!

 

[FL_runner]

Halos are not really my style because I think they’re too fancy for me but yours makes me feel like I NEED one!

That’s really kind of you! It’s my only halo, I wanted to try something different... I have always thought they were too “much” but I’m loving it!

 

[m1918]

That’s really kind of you! It’s my only halo, I wanted to try something different... I have always thought they were too “much” but I’m loving it!

I love that for you! Enjoy it!

 

[Myshinybestlife]

I got my rings from DK and I am in awe of his skill and craftsmanship.
Its been cloudy here the last few days. These are some pictures of my lemon candy, I also had him make a curved 9 stone band with 17 pointers. I wanted the ring low set, making the band curved helped keep it low.

 

[FL_runner]

I got my rings from DK and I am in awe of his skill and craftsmanship.
Its been cloudy here the last few days. These are some pictures of my lemon candy, I also had him make a curved 9 stone band with 17 pointers. I wanted the ring low set, making the band curved helped keep it low.

Pure sunshine! Beautiful!

 

[AprilBaby]

I got my rings from DK and I am in awe of his skill and craftsmanship.
Its been cloudy here the last few days. These are some pictures of my lemon candy, I also had him make a curved 9 stone band with 17 pointers. I wanted the ring low set, making the band curved helped keep it low.

I LOVE your setting!

 

[Wombats]

I got my rings from DK and I am in awe of his skill and craftsmanship.
Its been cloudy here the last few days. These are some pictures of my lemon candy, I also had him make a curved 9 stone band with 17 pointers. I wanted the ring low set, making the band curved helped keep it low.

Absolutely stunning!

 

[reyasjose]

So these just arrived SQUEEEEEE!!! I'll do an official post soon, but life is crazy the next few days and wanted y'all to see these beauties, all 8 cut by Yoram

2.53ct Octavia (Yoram's first MMD) solitaire
1.67ctw vintage asschers 7 stone band

The settings are by David Klass. Size 5.5 (size 5 finger)

Major ring envy! That asscher is gorgeous and classy

 

[Diamonds are forever]

The other day I was in a gorcery store I rarely go to ... and when I looked at my diamond, I had a shock ... I think I'll ask them if I can live there ...

View this content on Instagram

View this content on Instagram

 

[AprilBaby]

Gorgeous!

 

[Ibrakeforpossums]

OMG,I saw this a while back, I wanted it then and now I want it more. I want a ring just like that and I'll wear it to bed and not even care if I cut my face. It's just killer! Can you share where you got it?

 

[Lisag103]

Just wanted to add my MMD bling.
I have posted all the details on another post but here is my 1.2 E VS2 oval halo! I have just commission a 3mm shared prong band so can’t wait for that!

 

[FL_runner]

Just wanted to add my MMD bling.
I have posted all the details on another post but here is my 1.2 E VS2 oval halo! I have just commission a 3mm shared prong band so can’t wait for that!
Beautiful! It looks lovely on your hand and the cut of the oval is really nice.

 

[AprilBaby]

Just lovely!

 

[vintageloves]

I absolutely love the style of this!

Just wanted to add my MMD bling.
I have posted all the details on another post but here is my 1.2 E VS2 oval halo! I have just commission a 3mm shared prong band so can’t wait for that!

 

[sprinklesparkles]

Cleaned my ring and took some photos.

 

[MeowMeow]

Cleaned my ring and took some photos.

Super pretty!!!