Find your diamond
Find your jewelry
shape
carat
color
clarity

The Forum Engagement Ring Folder/Eye Candy

Posted by pinkprashu

185 bezel diamond ring with milgrain from ID jewelry

[urlhttps://www.pricescope.com/community/threads/id-jewelry-mistake-turns-to-be-my-gain.159047/][/url]

IMG_0550.jpg
 
My new one

1.25 centre RB G VS1 (over 2 carats in total w/side pave & halo)

Halo Orange Gerbera.jpg

Demented I.jpg

IMG_6569.JPG
 
https://www.pricescope.com/community/threads/a-different-omc-halo.159315/
natascha » 12 Apr 2011 17:29
Hi everyone,
My long ring saga is nearing it's end. My somewhat crazy ideas have finally materialized. I know they are not everyones cup of tea but I am really pleased with how my ideas meshed into a lovely result.

It is really scary to try to bring something into existence when you have never seen anything like it. Add to that that the stone I fell in love with was not really conductive to the design I wanted. I really want to thank Daniel and Caren from DanielM for holding my hand, for doing so many CADs and trying at all times to create miracles, without them it would have been a harrowing experience.

The stats:
Daniel weighed the stone and it just goes to show that with old cuts you can never know the weight just from measurements.
Centerstone is a OMC cut diamond coming in at 1.07ct and facing up quite a bit larger at 6,89x6,17mm.
I finally went with 1.1mm melee in the halo, 4 bezeled rounds in the shank at 1.5mm and 4 baguettes at 2.5x1.5mm.

Now the photos that Caren took:
 

Attachments

joe.laroza » 13 Apr 2011 14:04
Hi everyone! I wanted to show you all the new engagement ring I bought my fiance. Here are the diamonds statistics:

ROUND BRILLIANT

Measurements: 7.30 - 7.35 x 4.53 mm
Carat Weight: 1.50 carat
Color Grade: J
Clarity Grade: VS1
Cut Grade: Excellent

PROPORTIONS:

Depth: 61.8%
Table: 58%
Crown Angle: 34.5°
Crown Height: 14.5%
Pavilion Angle: 41.0°
Pavilion Depth: 43.5%
Star length: 50%
Lower Half: 80%
Girdle: Medium to Slightly Thick, Faceted
Culet: None

FINISH:

Polish: Excellent
Symmetry: Excellent
Fluorescence: None

HCA Grading:

Factor Grade

Light Return Excellent
Fire Very Good
Scintillation Very Good
Spread
or diameter for weight Very Good

Total Visual Performance 2.0 - Very Good

Well, I went with the J-color because it gave me the value I needed to up to a 1.50ct. I was also inspired to buy this diamond because of its XXX-cut and VS1 clarity grading. The diamond is stunning in person and currently we have just sent it back to Blue-Nile to have it resized. Handshots will come in a week or two while we wait for the ring.

Please, comments/criticisms!!! Tell me what you think. Did I do good?

https://www.pricescope.com/communit...pave-diamond-e-ring-1-5ct-vs1-ideal-j.159358/
 

Attachments

PrincessNuggz » 12 Apr 2011 18:48
Just wanted to share my new engagement ring with you all! My boyfriend (well, now fiance) proposed last night!

You may or may not remember my diamond quest as posted in Rocky Talky a couple of months ago:

https://www.pricescope.com/community/threads/its-another-help-me-choose-a-diamond-thread.157214/
Here are the specs:
Setting: Tacori 4015RD6 in Platinum

Diamond:

Shape: Round
Carat Weight: 0.846ct
Color: G
Clarity: SI1
AGS Cut Grade: Ideal
AGS Light Performance: Ideal
Optical Symmetry: Superior
Polish: Ideal
Symmetry: Ideal
Fluorescence: None
Width: 6.12mm
Length: 6.10mm
Depth: 3.77mm
Table Percentage: 53.80%
Depth Percentage: 61.70%
Crown ∠: 34.70°
Pavilion ∠: 40.80°
Finger size 3.5





https://www.pricescope.com/community/threads/my-turn.159319/

tacori.jpg
 
https://www.pricescope.com/community/threads/my-little-van-craeynest-treasure.159374/

diamondseeker2006 » 13 Apr 2011 20:14
I just happened to find this little ring doing a random search for Van Craeynest on ebay the other day. It had just been listed and it was exactly my size! I really wanted a pretty band to wear when I don't want to wear my wedding set, and this appeared to be just what I was looking for! The pictures weren't great (and I am not photographer, either, so I wasn't complaining!), so I wasn't 100% sure of the condition and the ring was not returnable. But the price was excellent and I had to take the chance! It came today and it is beautiful!!! You can see the fine tiny milgrain in some of the close-ups!
 

Attachments

makhro82 » 12 Apr 2011 20:38
I got an email today from Mark T. at ERD telling me my fiance's black diamond project was finally done:) It is exactly what I pictured and I am so excited to have it in my little hands on Thursday after they do the engraving tomorrow. My fiance does not wear jewelry and his only request was black diamonds so I am very excited to present my creation to him on our wedding day. Weather permitting I will take many pictures on Thursday with my replacement ring ERD did for me after my original got mangled somehow. Here are the posts regarding the black diamond project if you're interested:

https://www.pricescope.com/community/threads/my-attempt-at-an-artist-rendering-lol.156849/
https://www.pricescope.com/community/threads/my-black-diamonds-cads-are-here.157808/
https://www.pricescope.com/community/threads/two-weeks-in-and-the-wax-is-ready.158352/
 

Attachments

kal2021 » 13 Apr 2011 22:56 For those of you that have read some of my posts you know my quest for the perfect e-ring has been anything but perfect! But alas, BGD (these people seriously rock) and my wonderful fiance have finally made my dreams of a classic, simple, well-crafted, solitaire RB diamond ring come true! And of course my FI and I couldn't have done it without the help of the amazing people on PS, so a big THANK YOU to all of you for your guidance. I feel so fortunate to have found this site and to have learned so much from all of you - it has changed my diamond buying forever! So without further delay...
Specs:
Brian Gavin Signature Hearts and Arrows
1.23 H VS2


https://www.pricescope.com/community/threads/my-bgd-solitaire-e-ring-is-here.159381/
 

Attachments

farmer gal » 14 Apr 2011 11:29 My Diamond has arrived and landed in my setting and I love it! Not the best photographer!


Diamond Specs per GIA cert:

Measurements: 6.24x 6.26 x 3.85

Carat weight: 0.92

Color: E

Clarity: SI 1

Cut Grade Excellent

Polish and Symmetry: Excellent

Clarity Characteristics: Crystal

Table % 56

Depth % 61.6

Crown Angle: 34.5

Pavilion Angle : 40.8

HCA score: 1.30

Setting 1.25 ctw G SI 1 in 14k white gold size 6.5

https://www.pricescope.com/community/threads/my-rind-is-complete.159395/

new.jpg
 
First of all, let me apologize for such bad quality of the picture, but i would love your opinion on these two rings. I love both rings, but I am not so sure if the go well together. What do you think?

photo.JPG
 
Chasiu » 15 Apr 2011 20:55 After over two years since the initial proposal and over a year and a half of marriage, DH and I finally purchased an engagement ring

HOWEVER, Lesley more than made up for it by presenting me with a stone of a the same color and almost same size (which I had also considered) but 1 clarity grade up. I decided to go with Elegance solitaire, which just really spoke to me. So here, I present the glamor shots of my 1.224 J VS2 in an 18k white gold Elegance setting (size 7), which I picked up earlier this morning

Carat: 1.224
Color: J
Clarity: VS2
Measurements: 6.85×6.88×4.22
Table %: 55.4
Depth %: 61.6
Crown Angle: 34.8
Pav Angle: 40.7
Lower Girdle %: 78.0

https://www.pricescope.com/community/threads/the-amazing-bgd-elegance.159478/
 

Attachments

mxm - more pics needed
 
Bling-A-Licious » 17 Apr 2011 10:13 my .85 G si2 in a size 5.25
 

Attachments

Novela handshot from iPhone

216073_939649173736_37522113_43518171_656982_n.jpg
 
MyDiamondSparkles » 18 Apr 2011 10:07 I finally got around to taking a few photos of my ring.

It's a rose cut marquise! I wasn't even looking for a marquise but knew I wanted a rose cut. This one just happend to sing to my heart.

Okay, so here are the specs, although I still need to have this diamond graded:

3.78 rose cut marquise, although it is mounted flat side up. Which I thought was weird, but I like the ring so much I am unsure if I will remount it facet side up.
19.6 x 9.2 mm
Original platinum setting dates around 1880's to 1910's.
Color is L
Clarity is Si1

https://www.pricescope.com/communit...here-3-87-carat-rose-cut.159559/#post-2899544
 

Attachments

JoeNewbie11 » 18 Apr 2011 11:55 Here's pics of my new tension ring from Boone Rings. A big thanks to Bruce for a great ring, the craftsmanship and quality of the ring is outstanding.

Spec on the ring:
Material: Titanium with 18k gold inlay
Width: 6 mm
Size:8.75
Shape: Round, eccentric

Spec on the stone: check out the thread with pics here:

https://www.pricescope.com/communit...mond-pic-inside.158933/#post-2888453#p2888453


https://www.pricescope.com/communit...nsion-ring-with-0-41-carat-d-i1-round.159560/

tension.jpg
 
frankiextah » 20 Apr 2011 00:53 I met with Steven Kirsch about 2 weeks ago to re-set my engagement ring, and after in-depth discussions (and lots of patience from Steven's end), Steven had come up with a brilliant idea for my halo, and his first attempt, to create a knife edge 2-row pave halo setting. The result is amazing, the setting creates an illusion of a higher crown for my modern RB stone, giving the ring a beautiful profile !

https://www.pricescope.com/forum/sh...2-32ct-rb-halo-ring-tons-of-pics-t159649.html
stats :

center stone -

2.32ct G VS1
AGS000
8.47mm x 8.49mm x 5.21mm

setting -

ring shank = 1.85mm width
halo = 1.50mm
gallery (donut) = 5mm diameter
setting height = 7.5mm from base of donut to top of diamond
diamond count = 96 diamond melee
approx. 1.3ctw
ring size = tight 5


without further ado, pics !

frankie.jpg
 
https://www.pricescope.com/communit...s-ring-and-necklace-custom-made-by-wf.159548/

bluemoon2 » 17 Apr 2011 23:15 My bad - I have enjoyed both items for a while, and finally got chance to share them here with you.

I had 3 small loose diamonds which I got 4-5 years ago. I was seeking ideas how to utilize them earlier last year at this forum.
I fell in love with Fancydiamond's Pear halo pendant and 5-stone ring in trellis setting you ladies own.

I don't budget to buy another pear stone. So I had idea to use one of my small loose stone G VS2 0.65cw as a dangling inside the pear halo.
Other two loose stones: G SI2 0.48cw, G SI1 0.42, togetehr with 3 more ACA( G VS2 0.405, F VS2 0.404, F SI1 0.410) would make my 5-stone ring ( total 2.12ctw).

Both items turned out to be very beautiful -- the WF team did it again. The great customer service supported me through the whole making process.

I wear my 5-stone ring daily and enjoy it so much. The only problem it creates to me now is that it makes me feel my eRing is too small.
I need an upgrade!!!
 

Attachments

You must log in or register to reply here.
GET 3 FREE HCA RESULTS JOIN THE FORUM. ASK FOR HELP
Jewelry Blog
PriceScope-Concierge-Ad
Find prime cuts.
Top